Enzyme-linked immunosorbent assay for Antigen Detection.
Organism Species
Mus musculus (Mouse)
Format
48T, 96T, 96Tx5, 96Tx10, 96Tx100
Specificity
This assay has high sensitivity and excellent specificity for detection of Mini Samples Pepsin (PP) . No significant cross-reactivity or interference between Mini Samples Pepsin (PP) and analogues was observed.
Sensitivity
The minimum detectable dose of this kit is typically less than 0.51ng/mL
Detection Range
1.23-100ng/mL
Precision
Intra-assay Precision (Precision within an assay) : 3 samples with low, middle and high level Mini Samples Pepsin (PP) were tested 20 times on one plate, respectively. Inter-assay Precision (Precision between assays) : 3 samples with low, middle and high level Mini Samples Pepsin (PP) were tested on 3 different plates, 8 replicates in each plate. CV (%) = SD/meanX100 Intra-Assay: CV Inter-Assay: CV Inter-Assay: CV
Stability
The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition. To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.
Assay Principle
This assay employs the competitive inhibition enzyme immunoassay technique. A monoclonal antibody specific to Mini Samples Pepsin (PP) has been pre-coated onto a microplate. A competitive inhibition reaction is launched between biotin labeled Mini Samples Pepsin (PP) and unlabeled Mini Samples Pepsin (PP) (Standards or samples) with the pre-coated antibody specific to Mini Samples Pepsin (PP) . After incubation the unbound conjugate is washed off. Next, avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. The amount of bound HRP conjugate is reverse proportional to the concentration of Mini Samples Pepsin (PP) in the sample. After addition of the substrate solution, the intensity of color developed is reverse proportional to the concentration of Mini Samples Pepsin (PP) in the sample.
Assay Protocol
1. Prepare all reagents, samples and standards; 2. Add 25µ L standard or sample to each well. Incubate 1 hour at 37° C; 3. Aspirate and add 25µ L prepared Detection Reagent A. Incubate 1 hour at 37° C; 4. Aspirate and wash 3 times; 5. Add 25µ L prepared Detection Reagent B. Incubate 30 minutes at 37° C; 6. Aspirate and wash 5 times; 7. Add 25µ L Substrate Solution. Incubate 10-20 minutes at 37° C; 8. Add 20µ L Stop Solution. Read at 450nm immediately.
Assay Performance Time
3h
Method
Double-antibody Sandwich
Sample Type
Serum, plasma, tissue homogenates, cell lysates, cell culture supernates and other biological fluids
